To build and design in storey building in limited space, there are several factors that need to be noticed. Land is increasingly expensive and increasingly rare today is the phenomena in big cities. As a result the number of residential development that utilizes existing lands and sizes are also increasingly minimized.
Although needs of place to live are increasing and urgent due all communities need a place to live. Solutions that can be done to take advantage of small location and maximize it as possible to build a building with storey to get more space. Thus this should have good planning.
For story building usually require a lots of materials because we have to make a second floor plate made of cast reinforced by concrete material. The tall buildings are usually built under the floor as high as 4 meters. As for the high walls of the second floor about 3 meters. So in anticipation of this we can cut the high-building so that unused material not so much that can reduce development expenditure, of course. But without reducing the comfort and beauty of the building.
For the second floor we can take advantage of the slope of the roof which is usually shaped sloping. For our basement wall trim height to 3.2 meters so that the shorter stay is not too hot for the temperature in the room. And for the second floor we make we take advantage of 1.5 meters and also the slope of the roof. So that later would seem more efficient buildings. So the total wall height is 4.7 meters.
For the second floor should only be designated as a bedroom or lounge. Because it is not designed for the family room. And it is usually the 2nd floor space is usually only for sleeping space only. To cope with the heat on the second floor would suggest using roofing materials that can reduce heat such as ceramic tile, but can reduce heat ceramic tiles can also muffle the sound of heavy rain.
Although it will cost you more money to spend but but saves you from building high-reduction. A little extra to save the budget for the construction easier and cheaper but not cheap that is on the 2nd floor using flooring materials fabrication. This is in addition to cost savings for the manufacture of ceilings on the ground floor as well for making savings sanitation. Due to sanitation should be made straight with a position on the downstairs bathroom.